DB-2 Tech Specs

Digital Inputs and Outputs
Connectors
BNC (AES3-id, 75 ohm), RCA Phono (S/PDIF)
Formats
AES3-id (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958
Output Dither
HPF TPDF dither 8-24 bit
Word Clock Input
BNC, 75 ohm, 0.6 to 10 Vpp
Sample Rates
32 kHz, 44.1 kHz, 48 kHz
Processing Delay
0.5 ms @ 48 kHz
Additional Delay
0-1000 ms, 24 bit at all sample rates
Frequency Response DIO
DC to 23.9 kHz ± 0.01 dB @ 48 kHz
Processing Resolution
48 bit fixed point
Sample Rate Conversion
Type
Asynchronous
Dynamic Range
120 dB
THD+N
-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
Input Rate Range
31 kHz to 49 kHz
Analog Inputs
Connectors
XLR balanced (pin 2 hot)
Impedance
20 kohm (balanced)
Max. Input Level
+28 dBu (balanced)
Min Input Level (for 0 dBFS)
4 dBu (balanced)
A to D Conversion
24 bit (1 bit, 128 times oversampling)
A to D Delay
0.8 ms @ 48 kHz
Dynamic Range
>103 dB (unweighted), >106 dB(A)
THD
-95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)
Frequency Response
10 Hz to 20 kHz: +0/-0.2 dB
Crosstalk
<-80 dB, 10 Hz to 20 kHz, typical –100 dB @ 1 kHz
Analog Outputs
Connectors
XLR balanced (pin 2 hot)
By-pass
Through relay
Impedance
40 ohm (balanced)
Max. Output Level
+26 dBu (balanced)
Full Scale Output Range
-4 dBu to +26 dBu (balanced)
D to A Conversion
24 bit (1 bit, 128 times oversampling)
D to A Delay
0.57 ms @ 48 kHz
Dynamic Range
>100 dB (unweighted), >104 dB(A)
THD
-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)
Frequency Response
10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk
<-60 dB, 10 Hz to 20 kHz, typical –90 dB @ 1 kHz
EMC
Complies With
EN 55103-1 and EN 55103-2, FCC part 15 Class B, CISPR 22 Class B
Certified To
IEC 60065, EN 60065, UL60065 and CSA E60065, CSA FILE# 186633
Environment
Operating Temperature
32° F to 122° F (0° C to 50° C)
Storage Temperature
-22° F to 167° F (-30° C to 70° C)
Humidity
Max. 90% non-condensing
PCMCIA Interface
Connector
PC Card, 68 pin type 1 cards
Standards
PCMCIA 2.0, JEIDA 4.0
Card Format
Supports up to 2 MB SRAM
Control Interface
RS232
9 Pin SUB-D (RS232 to USB cable included in box)
GPI, Pedal, Fader
1/4 inch phone jack
General
Dimensions (W x H x D)
19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight
5.2 lb. (2.35 kg)
Finish
Anodized aluminum face. Plated and painted steel chassis development
Backup Battery Life
> 10 Years
Mains Voltage
100 to 240 VAC, 50 to 60 Hz - (auto-select)
Power Consumption
< 20W
Warranty Parts and labor
3 Years